R32 GT-R Base file and issues

Questions about the Platinum Pro Plug-in ECU's? Ask here.
Posts: 2
Joined: Sun Jun 07, 2020 7:20 am

R32 GT-R Base file and issues

Postby GDZi11A » Sun Jun 07, 2020 7:36 am

Hey guys, need help with a base map and have a couple issues.

R32 GT-R With Bosch 1000cc Injectors, Upgraded GT2860-5's Running Wastegate Pressure "1 Bar", Twin Disk ,Large FMIC and Full TurboBack.

I have a Can Gauge, WB1 and 3 Bar Motorsport Map.

Wideband and Can gauge work but my Map Sensor isn't, Ive checked pin out and all seems good.

5V pin on MAP to Pin1 On Rear Aux
Signal Ground to Pin 4 On Rear Aux
Signal to Pin 2 On Rear Aux

I configured it all thru main setup but nothing.

Next issue is my Fueling- The people I got my injectors thru sent me this calibration for injectors but when I use it I can barley get the car to start and idle. to get the car idling I've set 12v and 13v to 1.49

Map Sensor- https://ibb.co/25SY2fY
Injector Data- https://ibb.co/ZcHzBjM
Link To My Base File- https://www.dropbox.com/s/mc6kmnqktn4zqwu/GDZilla%20Main.hR32V2-114?dl=0

Help me with a base file please. Shit ill thru some money your way via Venmo or PayPal

Posts: 2
Joined: Sun Jun 07, 2020 7:20 am

Re: R32 GT-R Base file and issues

Postby GDZi11A » Mon Jun 08, 2020 6:47 am

Ok got the car idling smoothly and the map sensor is working.

once I take it out and give it any gas it leans out. if I. modify the VE Table it would need 100-200% which isn't right. Any Help would be appreciated as I will be driving it to the tuners in a week to get tuned

Return to “Platinum Pro Plug-in”

Who is online

Users browsing this forum: No registered users and 2 guests