DTO p0219, p0373 on RB20

Questions about the Platinum Pro Plug-in ECU's? Ask here.
KevinA
Posts: 2
Joined: Fri May 07, 2010 9:37 am

DTO p0219, p0373 on RB20

Postby KevinA » Thu Jun 03, 2021 5:43 am

I have a RB20 that has been sitting for many years. After doing some fuel system fixes,
After trying to start itm my ecu is throwing P0219 and P0373 errors. P0373 points to a bad CAS, but i can't find any information on P0219 errors.

How do I start troubleshooting these errors?

Orangeblue
Posts: 119
Joined: Mon Apr 08, 2019 5:54 am
Location: Germany

Re: DTO p0219, p0373 on RB20

Postby Orangeblue » Sun Jun 06, 2021 10:01 am

DTC P0219 Engine Overspeed Condition
DTC P0373 Timing Reference High Resolution Signal A Intermittent/Erratic Pulses

Since RBs combine the crank (engine speed) and cam (engine position) into the CAS,
could be both are related to a bad CAS sensor...

Check power to ground on the plug.
Signal should be checked with a oscilloscope.
Continuity of and between the wires and to the chassis, :arrow: disconnect Baterie, ECU and CAS for this test! :!:

https://support.haltech.com/portal/en/k ... nformation
Image
'92 Opel Omega Wagon
'94 Opel Astra 'vert


Return to “Platinum Pro Plug-in”

Who is online

Users browsing this forum: No registered users and 1 guest