(New poster here)
Vehicle : 2006 Infiniti G35 Coupe 6MT
ECU: Platinum Pro Plug-in (for 350z/G35)
ECU Manager Software: 1.14
Firmware Version: Z184.108.40.206
Problem: Codes P2109 and P2133 (both for ETC)
Quick details on issue: This started after we swapped the throttle body on the vehicle. Before the throttle body swap, the ECU was reading the TPS with no issue. After the swap, we started getting these codes (tested with both the aftermarket and factory throttle body it was originally working with). Calibration attempts via the software fail with an error(5) code on step 2. (Wiring wasn't altered during or since the throttle body install, and we installed a new OEM pedal assembly (including a new TPS) after doing some initial troubleshooting w/ Haltech support in KY, which suggested the TPS was failing.)
Online research led me to this post suggesting a potential fix via updating the firmware to Haltech-Z33-1.13.2.hfmp. This particular firmware revision is no longer available for download on Haltech's site, and I was told by Haltech support that this file wasn't for my vehicle - however, based on how the problem triggered, troubleshooting done thus far and the change log fixes listed for 1.13.2 (which supposedly addresses some ETC issues), it seems this may be firmware/software related at this point.
Can someone confirm if Haltech-Z33-1.13.2.hfmp is indeed the latest firmware revision available for the Platinum Pro Plug-in ECU? (I would love to know I'm running the latest available firmware and software and I'm not dealing with a known bug before we proceed further with troubleshooting).
Thanks in advance.