help with base map for BMW N54 engine.

Questions about the Elite Series ECU's? Ask here.
salaausi
Posts: 6
Joined: Mon Feb 04, 2019 11:58 pm

help with base map for BMW N54 engine.

Postby salaausi » Tue Feb 05, 2019 12:26 am

Hi,

I'm using Haltech Elite 2500 and trying to hook up Elite 2500 with my car with BMW N54 engine.

Does any body have base map for BMW N54 engine?

also how to wire electric water pump with Haltech Elite 2500? Is it possible? :?

and how to wire accelerator paddle(6 wire)?

how to wire throttle body connector?

How to wire both cam sensors(exhaust and intake) ?

Cheers!! :roll:

User avatar
HaltechMatthew
Haltech Staff
Posts: 3304
Joined: Tue Feb 07, 2012 12:45 pm
Location: Sydney, Australia
Contact:

Re: help with base map for BMW N54 engine.

Postby HaltechMatthew » Tue Feb 05, 2019 2:59 pm

N-engines are DI and we do not support this.

salaausi
Posts: 6
Joined: Mon Feb 04, 2019 11:58 pm

Re: help with base map for BMW N54 engine.

Postby salaausi » Tue Feb 05, 2019 8:06 pm

HaltechMatthew wrote:N-engines are DI and we do not support this.


Hello Matthew,

Bought a Elite 2500 ecu with universal wire harness.(34 , and 26pin)

I have already posted this in a forum, but you replied this is not support with DI engines. OEM wireharness is already removed from the car and planing to make a fresh wire harness with the elite 2500 connector.

But I don't use DI at this moment. We bought a port injection kit for the engine. (please check the link)
https://www.fuel-it.com/bmw-e-series-port-injection/

so forget about the DI.

So I have only few questions about this before proceed with the Elite 2500.

1) Just wondering is it possible to Wire Elite 2500 ECU with the BMW N54 engine?
2) Do you have a base map for this engine?
3)How to wire electric water pump with Elite 2500? Is it possible?
4)How to wire accelerator paddle(6 wire)?
5)How to wire throttle body connector?
6)How to wire both cam sensors(exhaust & intake) ?
7) How to wire VANOS solenoids(exhaust & intake)?

Appreciate id you can help with this.

Thanks
Harry

User avatar
HaltechMatthew
Haltech Staff
Posts: 3304
Joined: Tue Feb 07, 2012 12:45 pm
Location: Sydney, Australia
Contact:

Re: help with base map for BMW N54 engine.

Postby HaltechMatthew » Wed Feb 06, 2019 10:17 am

Cant help you sorry. Never seen one of these engines without DI. They should use the common Bosch 60-2 crank and 3-tooth cam patterns so this part is easy. The rest though I have zero info on them. In our software the trigger is set as Honda L12 which was the first engine supported using this pattern. Most port injected cars used 4-tooth cam sensors and it seems to be a DI engine thing where they use 3x.

salaausi
Posts: 6
Joined: Mon Feb 04, 2019 11:58 pm

Re: help with base map for BMW N54 engine.

Postby salaausi » Fri Jul 09, 2021 9:26 am

anybody tried N54 engine with Ported injection yet?
Looking for a base map.


Return to “Elite Series”

Who is online

Users browsing this forum: No registered users and 6 guests