CAN Keypad to Haltech Elite

Questions about the Elite Series ECU's? Ask here.
dale_che
Posts: 115
Joined: Sun May 15, 2011 5:38 pm

Re: CAN Keypad to Haltech Elite

Postby dale_che » Sun Oct 17, 2021 6:59 pm

trak-life wrote:I reckon...

At the time the Elite was supposed to be a flagship product, now it seems Haltech have neglected it and spent all the time on the Nexus.


you do realize that the elite is over 6 years old and in most electronics 6 years is past end of life... the fact they are still doing updates that are free for this product shows they are not neglecting it,.. when it was designed there was no can keypads, very few PDMs etc so its not like just flicking a switch to enable it..

trak-life
Posts: 11
Joined: Fri Jun 15, 2018 3:40 pm

Re: CAN Keypad to Haltech Elite

Postby trak-life » Tue Oct 26, 2021 2:41 pm

I don't need any form of PDM, it just needs to control functions like up/down boost, enable disable traction, enable/disable rolling AL, cruise control, etc.

In fact the Elite Barra plug in actually interfaces to the car means the support is there for canbus keypad integration.

It's just a firmware upgrade and not a hardware upgrade.

dale_che
Posts: 115
Joined: Sun May 15, 2011 5:38 pm

Re: CAN Keypad to Haltech Elite

Postby dale_che » Tue Oct 26, 2021 3:35 pm

trak-life wrote:I don't need any form of PDM, it just needs to control functions like up/down boost, enable disable traction, enable/disable rolling AL, cruise control, etc.

In fact the Elite Barra plug in actually interfaces to the car means the support is there for canbus keypad integration.

It's just a firmware upgrade and not a hardware upgrade.


you know the barra ecu is a totally different platform to the e1500/2500 etc? and it does not support the can keypad either.. the nexus was designed from the ground up to support it, they cannot simply throw the code in from the nexus to the elite and it will just work, different hardware different processors etc.. if it was just a matter of doing that they would have already done it

Comlb_4G63
Posts: 19
Joined: Mon Aug 09, 2021 8:03 am

Re: CAN Keypad to Haltech Elite

Postby Comlb_4G63 » Wed Oct 27, 2021 12:45 am

In Haltech's CAN bus explained YouTube video they answered a few comments on Elite compatibility. Haltech responded and said they are working on it. https://www.youtube.com/watch?v=gTcMg5-C20E&lc=Ugyy93qXIGDqWnOAjvt4AaABAg.9TmbkDZVPym9Tmfu5R-DX-


Return to “Elite Series”

Who is online

Users browsing this forum: No registered users and 4 guests