Elite CAN Protocol

Questions about the Elite Series ECU's? Ask here.
Posts: 1
Joined: Fri Jun 12, 2020 10:32 am

Elite CAN Protocol

Postby Bunchy1995 » Fri Jun 12, 2020 10:36 am


I have an Elite 2500 for my VH45 swapped Nissan Patrol, is the CAN protocol available for developers, wanting to have Can communication between the Ecu and a custom transmission controller.


User avatar
Posts: 383
Joined: Sun Aug 02, 2015 2:58 am

Re: Elite CAN Protocol

Postby blakebonkofsky » Sat Jun 13, 2020 7:47 am

I have the broadcast template, but it's a few years old, may be significantly out of date. But that's just for reading the data stream from the ECU. If you want or need any data back in to the ECU, you'll have to get creative.

Posts: 503
Joined: Sun May 25, 2008 8:56 pm

Re: Elite CAN Protocol

Postby Mobne_s13 » Tue Jun 16, 2020 1:21 am

This is the latest protocol what i know.
This is what you get over canbus. There is no option for adding more channels, and you can only read the can not transmitt anything to the ecu.
(98.72 KiB) Downloaded 1006 times

Posts: 1
Joined: Fri Oct 15, 2021 6:18 pm

Re: Elite CAN Protocol

Postby GTSS020 » Fri Oct 15, 2021 11:39 pm

Hello, does anyone know if there is a later version of the CAN BUS Protocol than the V2.35 version Mobne had kindly attached on the previous post from last year? Updated information I am specifically after is the CAN ID/message position and conversion for the Haltech TMS-4.

Any help appreciated; thanks!

Return to “Elite Series”

Who is online

Users browsing this forum: No registered users and 4 guests