Questions about the Elite Series ECU's? Ask here.
4 posts • Page 1 of 1
Hi i have problem with my S54 Turbo on ELITE 2500 , whole year was ok , in friday we parked the car and morning we cant started , after 5 atempt start imidietly without problem after that start 5 times without problem .... after some hour we try again and not started cranking but not started it shows error P1301 ofcourse during cranking is not SYNC , Reference detect error and trigger counter after 10s show 300 ...... rpm during cranking show 0-200-200-500-0-0-200 so still droping , so we using oem trigger wheel on crankshaft , OEM sensor, we try change te Crank sensor , Cam Sensor , we using two CAM sen, becouase of Vanos , so we are unable the start the car half a day , but on the last attempt voala start imidietly... and runs ... 1-2-3 start after that no problem , this morning te same cant start .... still the same problem , trigger wheel is clean , gap is ok ( oem ) wiring is OK , actually dont know where to find the problem , ALSO battery was on booster pack , bit exhausted from all of this , every setup on the car is the same whole year , if it start runs OK , no error and is SYNC whole time , i try quick start enable the same .... maybe somebody come with some solution what check it , also fuse and relays checked , all sensor are new and OEM not replica , trigger sync is NONE - HALF , so problem is i loosing the RPM signal , but im sure wiring and sensor is OK
Who is online
Users browsing this forum: Google [Bot] and 5 guests