Injector Low Pulse width table

Questions about the Elite Software Programmer? Ask here.
minez5
Posts: 7
Joined: Thu Nov 21, 2019 6:08 am

Injector Low Pulse width table

Postby minez5 » Fri Nov 22, 2019 2:19 am

Hi all,

I am new to the forum, for evo 8 Elite 1500 base map
I am trying to find Low pulse width adder table but cant find the option to add it.

Flat_Rate
Posts: 115
Joined: Wed Jan 20, 2010 12:57 pm

Re: Injector Low Pulse width table

Postby Flat_Rate » Fri Nov 22, 2019 3:38 am

its under the fuel tab on main setup page table labeled "short pulse width adder"

Once enabled the table is in the injection properties tab at the bottom of ECU navigator bar

minez5
Posts: 7
Joined: Thu Nov 21, 2019 6:08 am

Re: Injector Low Pulse width table

Postby minez5 » Fri Nov 22, 2019 4:44 am

Cant find it.
Capture.JPG

minez5
Posts: 7
Joined: Thu Nov 21, 2019 6:08 am

Re: Injector Low Pulse width table

Postby minez5 » Fri Nov 22, 2019 6:46 am

Here is what i found ..
The Evo 8 PNP base map i am loading is an old release 2.190

if i start a base map from scratch the short pulse width adder table shows with 2.33 release but now there are a
few questions ..

Will the new base map will match the PNP pinout and work ?

do we have a NEW PNP evo 8 base map with added features ?

User avatar
HaltechMatthew
Haltech Staff
Posts: 3304
Joined: Tue Feb 07, 2012 12:45 pm
Location: Sydney, Australia
Contact:

Re: Injector Low Pulse width table

Postby HaltechMatthew » Fri Nov 22, 2019 11:05 am

Update the firmware and you will than have the new table. Always use the newest firmware, we generally do not diagnose issues or tech support old versions anyway.

minez5
Posts: 7
Joined: Thu Nov 21, 2019 6:08 am

Re: Injector Low Pulse width table

Postby minez5 » Sat Nov 23, 2019 4:36 pm

Hello Matt,

Thanks for the reply.

I tried to update but its not working out for me.
Can you explain the procedure of updating the firmware of ESP online.

User avatar
HaltechMatthew
Haltech Staff
Posts: 3304
Joined: Tue Feb 07, 2012 12:45 pm
Location: Sydney, Australia
Contact:

Re: Injector Low Pulse width table

Postby HaltechMatthew » Thu Dec 12, 2019 10:50 am

Be online with your ECU and on the internet.
Go to the Green ESP Online button at the top.
Find the latest version and hit Upload To Device.
Sit back and don't touch anything until it is completely finished. It could take a couple of minutes.


Return to “Elite Software Programmer (ESP)”

Who is online

Users browsing this forum: No registered users and 1 guest