Oil pressure sensor calibration issues (Defi)

Questions about the Elite Software Programmer? Ask here.
Ricebox
Posts: 8
Joined: Tue Feb 05, 2019 12:31 pm

Oil pressure sensor calibration issues (Defi)

Postby Ricebox » Tue Feb 05, 2019 1:12 pm

Hey guys, i am running a Defi oil pressure sensor with my elite 1500, i got the sensor hooked up and am seeing 142 PSI with the ECU/ignition on (no oil pressure). from what i have gathered online the sensor is .5v to 4.5v 10 bar(145psi) max. i entered this information in the calibration table and am still getting this false reading. there were three wires; red - power, black - ground, white - signal and i wired those to the elite accordingly.

any ideas on what the issue could be?

Thanks

User avatar
HaltechMatthew
Haltech Staff
Posts: 2961
Joined: Tue Feb 07, 2012 12:45 pm
Location: Sydney, Australia
Contact:

Re: Oil pressure sensor calibration issues (Defi)

Postby HaltechMatthew » Tue Feb 05, 2019 3:01 pm

Turn the pullup off.

Ricebox
Posts: 8
Joined: Tue Feb 05, 2019 12:31 pm

Re: Oil pressure sensor calibration issues (Defi)

Postby Ricebox » Wed Feb 06, 2019 2:38 pm

That seems to have done the trick, thanks!. reading 2-3 psi on ignition-on but i assume that is normal.


Return to “Elite Software Programmer (ESP)”

Who is online

Users browsing this forum: No registered users and 2 guests